Hunterworks fully endorses using a complete Dalton clutch kit on a 750 no just springs for best performance. This is the very kit we use on our Brute.

Works with 08 and new Brute 750's

This kit is designed specifically to fit the new style drive clutch on the '08 750 Brute Force with the wide bushing. Improved acceleration and backshifting under load. Makes high range more useful at low speeds. Also offers flexibility to tune your clutch to rider preference and conditions. Two different primary springs are included to allow for preferred engagement RPM.

This kit incorporates the use of Dalton's patented Quick Adjust Cam Arms. This system allows adding or subtracting of the mass to the main body of the flyweights without removing the weights from the drive clutch.

Quick adjust feature means you can have a preferred set up for stock tires, altitude, or oversized tires quicker if you ride under varying circumstances or change tire sizes. No puller is required for most typical flyweight gram changes, as the base weight stays in the clutch during gram adjustment. Baseline set ups are included for most typical situations.

 The stock secondary spring on the 750 Brute is different than Prairie models and is sufficient for most trail applications for this tire size range and does not effect top speed (although it is well known that oversize tires DO hurt both acceleration and speed, proper clutch recalibration can help recover from those losses).

This kit can be upgraded to over 28" tires by simply adding a spring.